ISA Backplane
Revision as of 23:14, 14 May 2021 by Numberformat (talk | contribs) (Created page with "= MicroATX ISA Backplane - Version 1.1 = This backplane supports bus width up to 16 bits. It has onboard POST code indicators as well as a -5V regulator allowing you to use...")
MicroATX ISA Backplane - Version 1.1
This backplane supports bus width up to 16 bits. It has onboard POST code indicators as well as a -5V regulator allowing you to use it with modern power supplies.
Available For Sale
- Bare PCB
- Individual Components
- Full Component Kit
Features
- ATX Power Connector
- 16 Bit ISA bus
Required Tools
- Soldering Iron,
- Flux
- Rosin core solder
- Voltmeter
Assembly Steps
Start with the shorter components first. This way you can lay the board down flat on the table and be able to solder them in. The taller components go next.
- IC Sockets
- Capacitors (polarity doesn't matter unless you are using electrolytic ones)
- ISA Slots
- ATX Power connector
- LED Lights
Once board is assembled plug it in and standby light should go on. Then click the power button and the power lights should go on. The -5V regulator is option and if your power supply does not provide -5V then you can solder that in as well.
Testing the board
The board should be tested before plugging any additional cards into it. We can use a voltmeter to test the pins of the ISA slots to make sure they are providing the right voltage.